Solvent-free, very low emission dispersion adhesive for bonding PVC and CV floor coverings such as sheets and tiles, as well as tension free textile flooring with latex or fleece backing. Okamul UK eliminates odours through its anti-microbial properties.

The substrate must be inspected and ready for installation in accordance with the respective regulations of the individual countries as well as the current state of technology.

The surface must be sound and clean. Remove dirt, paint, oil, grease wax and other contamination which might act as a bondbraker. Okamul UK must be used as a product component together with other Kiesel floor installation system products.

Depending on the type of substrate, floor coverings and the requirements such as subsequent loading conditions, prepare substrate for laying using suitable Kiesel primers and leveling compounds. When installing vapor-tight coverings and/over non-absorbent substrates use sufficient amount of self-leveling compound to provide adhesive with proper hydration. Technical datasheets of other Kiesel products used, must also be complied with. A system structure must be ensured.

Stir Okamul UK well.
Use appropriate notched trowel to apply the adhesive onto the substrate. Install covering after a drying time of 15-30 minutes and roll down firmly. On non-absorbent substrates only a light adhesion is possible.
Weld joints not earlier than 24 hours after the installation. Follow installation instructions of the covering manufacturer.

*Coverage is approximate and is given for estimating purposes only. It may vary according to substrate
conditions and other factors.

Clean tools with water immediately after application.