High-strength, specialty cement-based grout for joint widths from 1-10 mm. Due to a highly dense mortar structure, this cement-based grout provides particular characteristics regarding its mechanical durability and abrasion resistance. Special cements provide a substantially higher resistance to chemical cleaning agents compared to that of conventional cement grouts. This makes them suitable for use in coordination with the respective object users and cleaning agent suppliers.
Due to their superb processing characteristics and the fast setting process, washing- out of the joints is avoided.

Servoperl royal can be used in interior, exterior and submersible applications. It is suitable for grouting ce-ramic surfaces, in particular stoneware, earthenware and porcelain stoneware in damp and wet areas, as well as heating screeds or drywall dividing walls and areas subjected to heavy use.

High-strength, specialty cement-based grout for joint widths from 1-10 mm. Due to a highly dense mortar structure, this cement-based grout provides particular characteristics regarding its mechanical durability and abrasion resistance. Special cements provide a substantially higher resistance to chemical cleaning agents compared to that of conventional cement grouts. This makes them suitable for use in coordination with the respective object users and cleaning agent suppliers.
Due to their superb processing characteristics and the fast setting process, washing-out of the joints is avoided.

Servoperl royal can be used in interior, exterior and submersible applications. It is suitable for grouting ce-ramic surfaces, in particular stoneware, earthenware and porcelain stoneware in damp and wet areas, as well as heating screeds or drywall dividing walls and areas subjected to heavy use.

Check the suitability of the surface and also the surface manufacturer‘s instructions. To ensure the uniform colour of the joint, use only material from one batch. Before starting washing, grout must be almost entirely dry, and the joints clean and uniform in depth.

With clean, cold water, mix Servoperl royal to a smooth, paste-like consistency to a uniform colour. Let the mixture rest for 3-5 minutes (slake time) before mixing once again to ensure a smooth and workable consistency. Remove any foreign material and spacers from the grout joint. Fill in the joints firstly transversely and then diagonally, completely filling them. If the mixture begins to become more difficult to spread, simply mix again to attain proper consistency. avoid adding any water. As soon as the joints start to dry, wipe with a sponge, using as little water as possible.

Sufficient strength has been achieved when the grout can be slightly depressed with a fingernail. Also using a sponge, remove any extra grout traces/film still remaining within an hour. Do not dust off while in a wet state. Any leftover material which has already thickened must not be re-mixed. Avoid direct sun and draughts dur-ing the setting process. It is recommended that freshly grouted outdoor areas, or non-absorbent coating ma-terials, be covered with a plastic poly and kept damp where necessary.

Note: Servoperl royal may scratch soft polished marble, glass or metal tile. Follow tile manufacture/ fabrica-tor recommendations or test a small area prior to use to determine suitability.

To avoid staining, please observe the following:
Low temperatures delay the setting process of the mixture, which can lead to discolouration. As a result of humidity from the substructure, efflorescence and staining can occur. Subsequent treatment of the set joint by scrubbing and cleaning with extremely diluted, acidic cleaning agents has proven to be effective. Water should be applied to the joint beforehand. On walls, work from top to bottom, and on floors, puddles should be avoided. Servoperl royal is a cement-based product and is therefore not absolutely resistant to aggressive cleaning agents and to water with high chlorine content.

Approx. 0.35 kg/m² for 15 cm x 15 cm tiles.
Approx. 0.50 kg/m² for 10 cm x 10 cm mosaic.
Approx. 1.00 kg/m² for 5 cm x 5 cm mosaic.

Approximate Coverage table per 11 lbs. bag.

Immediately clean tools with water after use.