Datasheet
ServoMulti S 105
Self-leveling compound
- self-leveling
- 1 - 5 mm layer thickness
- for indoor use
- pumpable
![[Translate to English:]](/fileadmin/kiesel/bilder/produkte/K_ServoMultiS105_S.png "[Translate to English:]")
Cement-bound, plasticised, self-leveling compound with good spreading properties for leveling of substrates. Ready for covering up to 5 mm layer thickness. Also suitable for asphalt screeds with a hardness class of IC 10, in layers up to 5 mm thick. ServoMulti S 105 is suitable as a substrate for laying elastic, textile floor coverings as well ceramic tiles.
ServoMulti S 105 cannot be used as a final floor or in wet rooms.
The substrate must be inspected and ready for installation in accordance with the respective regulations of the individual countries as well as the current state of technology.
Depending on the type of substrate and its subsequent use, prime with Okatmos® EG 10, Okatmos® EG 20, Okatmos® EG 25, Okatmos® UG 30, Okatmos® DSG, Okamul PU-V schnell, Okapox GF or Okapox SPG. The technical data sheets for the products used must be observed. A system structure assembly must be provided.
Mix ServoMulti S 105 with drinking water at a maximum speed of 600 rpm, using an electric mixer, until there are no clumps. Leave to stand for approx. 5 minutes and then mix again. Next, apply with a smooth or notch trowel. Avoid direct sunlight and draughts during the drying period. If in doubt, create a test surface with ServoMulti S 105.
Color
grey
Application
indoors, on floors, in dry areas
Thickness
1 - 5 mm
Suitable for chair castors (DIN EN 12529)
suitable from 1 mm layer thickness
Water demand
6,5 - 6,7 litres per 25 kg powder
Processing time*
approx. 40 minutes
Walkable*
after approx. 2 hours
Ready for installation*
after approx 24 hours
suitable
D1 according to TRGS 610
EMICODE®
EC1Plus according to GEV
store in a dry place; can be stored for approx. 6 months
*
At 68 °F (+20 °C) and 65% relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increasesthis value respectively.
| consumption* | approx. 0,30722 lbs/ft2 (ca. 1,5 kg/m²) |
| coverage* per 55 lbs (25 kg) paper sack | approx. 179 ft2 |
Coverage is approximate and is given for estimating purposes only. It may vary according to substrate conditions and other factors.
Clean tools immediately with water.
| Product description | Item no. | Item no. |
|---|---|---|
| 42 x 25 kg paper sacks | 80305 | 4015705803050 |
The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.
Revised: 20.01.2023/ag