Datasheet
Okatmos® UG 30
Universal primer
- for absorbent and non-absorbent substrates
- quick drying
- solvent-free (GISCODE D 1 according to TRGS 610)
- very low in low emission (EMICODE® EC 1PLUS according to GEV)
- provides high bond strength
- for interior and exterior applications
![[Translate to English:]](/fileadmin/kiesel/bilder/produkte/K_OkatmosUG30_F.png "[Translate to English:]")
Solvent-free (GISCODE D 1 according to TRGS 610), acrylic based primer with aggregates providing excellent bonding characteristics. Okatmos® UG 30 will bond and adhere to absorbent and non-absorbent substrates before interior levelling work or tile and natural stone installations. Okatmos® UG 30 can also be applied over properly prepared cut-back adhesives, old or badly sanded asphalt floors, terrazzo, tile, particle board, chipboard, OSB, cement backer units, concrete screeds and well bonded ceramic tiles.
When used over existing exterior tiles, a waterproofing membrane Servoflex DMS 1K Plus SuperTec is required. Metal and similar substrates must be rust-free and cleaned with acetone. Odourless and environmentally friendly.
The substrate must be dry, clean and load-bearing ready. Remove all dry and loose particles and bitumen cut-back mechanically.
Shake container before use.
Apply Okatmos® UG 30 undiluted onto substrate with lamb skin roller, brush or similar. Dilute Okatmos® UG 30 for porous concrete, untreated floors and other absorbent and / or gypsum based substrates 1:1 with water. Do not begin levelling or installation before primer has completely dried.
Color
blue
Application
interior, exterior walls and floors
Application temperature
41 °F to 86 °F (+5 °C to +30 °C) (substrate)
Approx. 10 minutess (over cementitious substrate). Over wooden structure at least 12 hours.
suitable
D 1 according to TRGS 610
EMICODE®
EC 1PLUS according to GEV
store in frost protected area for up to 12 months (keep from freezing)
*
At 68 °F (+20 °C) and 65 % relative humidity.
Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.
approx. 150 g/m² / 71 ft² per US Qtr. on non-absorbent surfaces / outdoor area
approx. 75 - 150 g/m² 71 - 143 per US Qtr. diluted with water 1:1 ratio on absorbent surface
Brush, lamb skin roller
Clean tools with water immediately after application.
| Product description | Item no. | Item no. |
|---|---|---|
| 60 x 10 kg plastic canister | 49010 | 4015705490106 |
| 96 x 5 kg plastic canister | 49023 | 4015705490236 |
| 50 boxes with 12 x 1.0 kg plastic bottles | 49009,4015705490090 |
The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.
Revised: 20.10.2026/ag