For the solvent-free, very low-emission, sanitising, rollable attachment of self-laying, reusable carpet tiles (with bitumen, fleece, PVC or PUR backing) onto thick, absorbent or non-absorbent indoor substrates. With its sanitising effect, Okatmos® ER 15 helps to prevent odours. Living space hygiene is effectively and sustainably supported.

The substrate must be tested and ready for laying pursuant to VOB, Part C, DIN 18 365 as well as the state-of-the-art. Prepare the substrate in accordance with the current BEB datasheet, “Assessment and Preparation of Substrates”, as well as Datasheet TKB-8.

Shake the Okatmos® ER 15 container well. Apply the slip brake to the substrate, using our Kiesel Strukturwalze or short-pile velour roller. Once the airing time (of the transparent fixing film) is over, arrange the carpet tiles, and carefully rub or roll the entire surface.

When working with double floor elements, make sure that no material enters the panel joints and glues them together. 

Anti-static additive Antistaticum D is required for anti-static / conductive carpet tiles. 
Please consult Kiesel technical department. 

The predetermined amount of Antistaticum D is first diluted with water at 1: 1 ratio and mixed to a homogeneous consistency stirring constantly. 

Consumption may vary and depends on the construction conditions, trowel sizing and application techniques.

Clean tools immediately with water.

• Avoid intensive eating, drinking and smoking while applying the product.
• Wear protective goggles!
• If adhesive or installation material comes into contact with your eyes, rinse immediately with plenty of water and consult an ophthalmologist.
• Protect your hands with waterproof, sturdy gloves!
• Wear long pants!
• Avoid prolonged skin contact with the adhesive or installation material. Affected skin areas must be cleaned immediately and thoroughly with water.
• The longer fresh adhesive or installation material remains on your skin, the greater the risk of serious skin damage.
• Keep children away from fresh adhesive or installation material!
• Do not allow it to enter sewers, waterways or soil.

The medium- or long- term release of significant concentrations of volatile organic compounds (VOCs) into the room air is not expected. However, thorough ventilation should be ensured during and after application and drying.

Product contains 2-methyl-2H-isothiazol-3-one (MIT) / 1,2-benzisothiazol-3(2H)-one (BIT).

Allergy information available at +49 711 93134-0.

Disposal:

The product must not enter waterways, wastewater or soil. Only recycle the packaging completely empty. Dispose of cured product residues as commercial waste similar to household waste. Containers with liquid residues are hazardous waste.

Composition:

Plastic dispersion, thickening, wetting, defoaming and preservative agents, water.