Solvent-free, very low emission dispersion adhesive for bonding PVC and CV floor coverings in sheets and tiles, as well as textile flooring with latex or fleece backing. Okatmos® EE 19 eliminates odours through its anti-microbial properties.

The substrate must comply with VOB Part C, DIN 18 365 and be ready for installation according to the current BEB publication "Assessment and preparation of substrates” and TKB-8 data sheets. Depending on the type of the covering and substrate use Kiesel suitable primers and leveling compounds. When installing vapor-tight coverings and/over non-absorbent substrates use sufficient amount of self-levelling compound to provide adhesive with proper hydration. The technical data sheets of the products used must be observed. A Kiesel product system must be present.

Mix Okatmos® EE 19 well. Then apply adhesive with the appropriate notched trowel onto the substrate. After an flash over time of 10-20 minutes install the covering and press carefully over the entire surface. On non-absorbent substrates only solid adhesion can be achieved. Seams can be welded after 24 hours. Follow installation instructions of the covering manufacturer.

Consumption depends independently on the quality of the substrate/surface and may differ depending on the self levelling and patching compounds, trowel manufacturers and installation procedures.

Clean tools immediately with water.