Datasheet
Okapox Accelerator
Accelerator for 2-component epoxy resin systems
- shortens reaction times
- minimizes waiting times
- easy to handle
- universal use
Accelerator additive for use with:
- epoxy resin primer Okapox GF
- epoxy resin grout/adhesive mortar for walls and floor surfaces Okapox royal
- epoxy resin grout and adhesive mortar for floor surfaces Okapox royal Boden
Okapox Accelerator shortens waiting and curing times when priming substrates prior to tile and parquet/engineered wood or other flooring installation. Finished areas can be exposed to stress much quicker. Depending on product, Okapox Accelerator results in superior mechanical and chemical properties after a shorter time. Suitable for interior and exterior applications.
Mix respectively 2-component epoxy resin systems until a homogeneous mixture. Add Okapox Accelerator in the specified mixing ratio.Then stir in homogeneously, transfer to fresh container, and stir again.
Color
yellowish, transparent
Application
Okapox GF, Okapox royal, Okapox royal Boden
Application temperature
min. +10 °C max. +25 °C (50 °F - 77 °F)
Processing time*
approx. 30 minutes
Walkable*
after approx. 3.5 - 4.0 hours
after approx. 3 days
store in a dry place for up to 12 months
(unopened packaging)
*
At 68 °F (+20 °C) and 65% relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.
The product contains: Reportable explosives precursors. Provision, transfer, possession and use in accordance with Regulation (EU) 2019/1148, Article 9.
1 container (200 ml) Okapox Accelerator for:
approx. 3,5 kg Okapox GF
approx. 5,0 kg Okapox royal
approx. 5,0 kg Okapox royal Boden
Clean tools with water immediately after application.
| Product description | Item no. | Item no. | |
|---|---|---|---|
| 200 ml plastic container | 14099 | 4099 | 4015705140995 |
The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.
Revised: 22.09.2022/ag