Washing aid for easier emulsifying and cleaning process. Reduces film resin and removes light epoxy film within 24 hours.

As the washing aid in epoxy grouting:

Add Okamul WH Plus at maximum 10% to the wash water and start immediately washing with Okapox royal or Okapox royal flooring grouted coverings using proper scrubbing pad and viscose sponge. Alternatively spray Okamul WH Plus on the grouted areas, re-emulsify and clean with clean water. Protect all adjacent surfaces. Make frequent water changes. Rinse again with clean water and clean sponge.
 

To remove epoxy film:

Use undiluted or in a mixing ratio of max. 1: 1 with water at least 12 hours after grouting. Protect all adjoining surfaces. After a reaction time of max. 15 minutes use white scrubbing pad in circular motion agitating epoxy film. Clean or rinse then with plenty of water.
 

For cleaning tools such as spatulas, trowels, mixing paddles:

Apply undiluted Okamul WH Plus with a brush on existing residues of PU adhesives, Bakit PU-P, Okamul PU-K epoxy primer and Okapox GF. Remove residue with cloth or paper towels first and then rinse it with water.

Check tiles, stone covering and tools for suitability first.
 

As the adhesive and paint remover:

Apply with a brush undiluted Okamul WH Plus in thick layer to remove ink / adhesive layer. Protect all adjacent areas. After reaction time of 15 minutes remove designated layers with spatula. Clean or rinse then with plenty of water. Try it first in an inconspicuous place for suitability before using it on designated area.

Avoid direct skin contact and use proper rubber gloves and goggle protection. Ensure good ventilation.
Avoid contact with plastics or natural stones (limestone).

As epoxy film remover: ca. 50-100 g/m²
Wash additive: ca. 30-60 g/m²

Brush, white scrubbing pad, viscose sponge

Clean tools immediately with water.