Datasheet
Okalift SuperChange Adhesive
Acrylic based adhesive
- ready to use
- stable consistency
- for interior only
Light colored dispersion adhesive for bonding of Okalift Super Change fabric on absorbent and non-absorbent substrates such as Cement and calcium sulphate screeds, plaster, plasterboard, aerated concrete, ceramic old flooring, terrazzo, drywall construction, plasterboard, chipboard, plywood; screwed sufficiently in dimensionally stable structures (only in dry rooms), precast concrete and in-situ concrete.
The substrate must comply with VOB, part C, DIN 18365, 18356, 18332, 18352, and examined in accordance with technical standards before installation. Uneven surfaces must be levelled before Okalift SuperChange fabric installation with Servofix/Servoplan self-levelling compounds. Loose and water-soluble paints must be removed. Prime absorbent surfaces, such as gypsum based cement surfaces with Okatmos® UG 30 in the ratio 1: 1 with water. Prime non-absorbent based substrates with Okatmos® UG 30 full strength and let it completely dry.
Install Okalift SuperChange fabric using attached trowel; size TKB B6. Spread the adhesive and keep the ridges up to its maximum angle and imbed fabric within 25 minutes into the fresh spread adhesive. Use the flat side of the trowel and immediately flatten the fabric/adhesive notches providing the full adhesive transfer.
Color
cream white
Application
interior, walls and floors
Open time (working)
approx. 25 minutes
Density
approx. 1,6 g/cm³
Walkable*
after approx. 12 hours
(depending on ambient temperature and absorbency of the substrate)
suitable
D 1 according to TRGS 610
EC 1Plus according to GEV
*
At 68 °F (+20 °C) and 65% relative humidity. Higher temperature and low humidity decreases, lower temperature and high humidity increases this value respectively.
ca. 800 g/m² / 200 ft² per unit with trowel size TKB B6
Installation only with TKB B6 trowel size.
Immediately with water.
| Product description | Item no. | Item no. |
|---|---|---|
| 33 x 15 kg/33 lbs. plastic bucket | 49100 |
The aforementioned information, especially the proposals for processing and utilizing our product, is based on our knowledge and experience. We recommend that you carry out your own tests in every case to ensure the suitability of our products for the intended process and processing purposes because of the different materials and the working conditions which lie beyond our area of influence. No liability can be derived from this advice or from verbal advice, unless we are responsible for (criminal) intent or gross negligence in this respect.
Revised: 23.09.2019/vm